Sierra Leonean Customer Ordered 6-Axle 80T Rear Dump Tipper Semi Trailer
Nov. 04, 2026
A Heavy-Duty Tipper for Mining and Construction Materials
ROADKING has completed one 6 axle rear dump tipper semi trailer for a local engineering and logistics customer in Sierra Leone. The trailer has passed its factory load test and is awaiting shipment to Freetown Port.
The customer plans to use it to transport bulk materials such as gravel, ore and construction aggregates. Mining and infrastructure projects across Sierra Leone create regular demand for this type of transport. Unpaved, uneven roads around mining areas and the outskirts of towns also place high demands on trailer capacity, frame strength and body wear resistance.

Six Axles and a Wear-Resistant U-Shaped Body
The trailer has a U-shaped body with internal dimensions of 12,500 × 2,500 × 2,200 mm and an effective volume of 55 m³. Its body floor and side panels use wear-resistant T700 high-strength steel, while the main beams are made of Q345B high-strength manganese steel. Reinforced side walls and automatic submerged arc welding are specified for the heavy-duty application.
A HYVA front-mounted hydraulic cylinder provides a maximum lifting angle of 50° for unloading bulk materials. The six-axle configuration distributes the load across six axles. The customer selected this configuration for heavy-duty transport and the operating conditions of local mining and construction routes.
Trailer Specifications
|
Item |
Specification |
|
Quantity |
1 unit |
|
Trailer type |
6 axle rear dump tipper semi-trailer |
|
Overall rated capacity |
80 tons, as specified in the order information |
|
Axles |
FUWA, 13 tons per axle |
|
Brake assemblies |
16 ton assemblies |
|
Internal body dimensions |
12,500 × 2,500 × 2,200 mm |
|
Body style |
U-shaped |
|
Effective volume |
55 m³ |
|
Hydraulic cylinder |
HYVA front-mounted cylinder |
|
Maximum lifting angle |
50° |
|
Main beams |
Q345B high-strength manganese steel |
|
Body floor and side panels |
Wear-resistant T700 high-strength steel |
|
Welding |
Automatic submerged arc welding |
|
Suspension |
Heavy-duty reinforced mechanical leaf spring suspension |
|
Braking and safety |
WABCO air brake valves, dual-line air brakes, ABS, side and rear underrun protection |
|
Tires |
12R22.5 tubeless tires, 24 per trailer |
|
Kingpin |
90# (3.5 inch) assembled kingpin |
|
Landing gear |
JOST C200 heavy-duty, two-speed landing gear |
|
Lighting and wiring |
24V LED lighting and 7-pin wiring harness |
|
Color |
Customer-specified military green |
|
Destination port |
Freetown, Sierra Leone |
|
Trade term |
FOB Qingdao Port |
The trailer also features polyurethane anti-corrosion paint. Before ocean shipment, it will be coated with thick rust-prevention wax, protected at key points and fully covered with a tarpaulin.

Load-Tested and Awaiting Shipment
The trailer has completed production and factory load testing. It is awaiting shipment to Freetown. After arrival in Sierra Leone, it is expected to support bulk-material transport for local mining and infrastructure projects.
ROADKING can configure rear dump trailers according to cargo type, body volume, axle arrangement, road conditions and local requirements.
Customer Questions and Answers
Q: What materials is this tipper trailer designed to carry?
A: It is intended for bulk materials such as gravel, ore and construction aggregates. The actual load weight depends on the material’s density and must comply with the trailer’s approved rating and applicable local regulations.
Q: Why choose a six-axle configuration?
A: A six-axle layout distributes the load across more axles and is suited to heavy-duty transport requirements. Actual loading must also account for the tractor unit, gross vehicle weight limits, axle-load rules and route restrictions.
Q: What does the HYVA hydraulic system do?
A: The trailer is equipped with a HYVA front-mounted lifting cylinder with a maximum lifting angle of 50° to raise the body for rear unloading. Unloading performance can vary with the cargo, ground conditions and operating method.
Q: How is the body configured for abrasive materials such as ore?
A: The floor and side panels use wear-resistant T700 high-strength steel, with reinforced side walls. Actual wear depends on the material, particle size, loading and unloading methods, and operating intensity.
Q: Is the trailer configured for rough mining roads?
A: It has heavy-duty reinforced mechanical leaf spring suspension and 12R22.5 tubeless tires. Operation should still account for the actual road conditions, speed, load and local requirements.

Contact ROADKING
ROADKING manufactures rear dump tipper semi trailers for mining, construction and bulk-material transport. Body design, hydraulic systems, axle configuration, suspension and other specifications can be discussed according to operating requirements.
Contact ROADKING to discuss a tipper trailer for your fleet. Share your cargo type, required body volume, route conditions and destination market to review a suitable configuration.